AP - The Recognized Standard In Audio Test

Introduction to the Basic Six Audio TestsHOME/SOLUTIONS/ INTRO TO AUDIO TEST/ CROSSTALK

Crosstalk Runtime 3:32

Crosstalk is unwanted leakage or bleed of a signal from one or more channels to other channels within a device.

It’s a fact of life when dealing with electronics, but with thoughtful layout of a PCB or appropriate shielding on cables, it can be kept to a negligible amount.

Measuring crosstalk is quite simple. We stimulate channel 1 with a signal, but measure the output of Channel 2. Channel 2 has no input, so on a device with zero crosstalk; it would have no output signal. Where crosstalk is present, we’ll see some signal that corresponds with the signal we’re giving Channel 1. To get a value for crosstalk, we take the level from the channel we’re measuring and divide by the full amount we measure on the stimulated channel. Because Crosstalk is a ratio, it’s usually expressed in dB.

Measuring stereo crosstalk is simple with a two channel analyzer, but when you have a home theatre receiver or a mixer with multiple inputs and outputs, it gets complicated.You could use a switcher and run through each combination of channels off and on, but it’s much easier to use a multichannel audio analyzer that can generate and analyze multiple channels independently and simultaneously.


Video instructions

Click the video to play. Be sure to visit us on the Audio Precision YouTube channel.

Related Content

The Audio Measurement Handbook

This reference handbook is a practical, hands-on guide for workers in all phases of the audio field.

Download AMH-1.pdf  (1.6 MB)

AP Knowledge Base

Hundreds of articles on various issues of audio test.

Go to Knowledge Base




Back To Top